Main structure and features

1、     the base, slide, table, column, headstock and other major parts are made of HT300 cast iron base; the base for the box-type structure, compact and reasonably symmetrical rib structure ensures high rigidity and bending cushioning properties of the base member ; A straddle-type bridge columns and internal grid-like ribs, effectively ensure the rigidity and precision Z-axis cutting force; the base member is made of resin sand molding and after aging treatment, long-term performance for the machine stability has provided a guarantee.

2、     X / Y / Zguide with a high speed, high rigidity, low friction, low noise, low temperature rise characteristics change, with automatic forced lubrication, improve machine accuracy life;

3、    Zto add balance with weights, to ensure smooth movement of the headstock, stable; Z loss of power to the drive motor with brake device;

4、    three directionsX, Y, Z feed using high-precision high-strength inner loop double nut preloading large lead ball screws, feed rate is high; drive motor through flexible coupling directly connected with the screw, into the servo motor directly to the power transfer to the high-precision ball screw, no backlash, which guarantees the machine's positioning accuracy and synchronization;

5、     using Taiwan's high-speed, high-precision, high-rigidity spindle unit, axial and radial load capacity, maximum speed up to 8000rpm;

1. thespindle center blowing structure, in the center of the spindle loose knife quickly with high-pressure gas inside the spindle taper cleaning, to ensure accuracy and tool holder life;

7, X, Y, Zthree directions rails, screw protection devices are used to ensure that the screw and clean the rails, ensure that the machine's power transmission and motion accuracy and longevity;

8, the machine adopts full protective outer protective structure design, easy operation, safe and reliable;

9, using a reliable centralized lubrication system, timing quantitative lubrication points on the machine automatically intermittent lubrication, lubrication time can be adjusted on the basis of working conditions;

10, the use of oil-water separation device can be collected most of the lubricating oil is separated from the coolant, to prevent the rapid deterioration of the cooling liquid, is conducive to environmental protection;

11, machine operating system using ergonomic principles, operation box independent design, can itself rotate, easy to operate.

III.Maim Paramters

a)      technical

b)      CNC control system